How to use Range Finder

How to use PumpPillStart here5 min readVideo 3:29October 3, 2026

Short answer Range Finder lists tokens whose market cap has held between the same low and high for days. Read the columns, the signs, the filters and the breakouts rail.

Walkthrough, 3:29. The voice is synthetic, the screens are the live product.Watch on YouTube

By the time a coin is trending, its first move has already happened. Range Finder, at /range-finder, lists the quiet ones: tokens whose market cap has stayed between the same low and high for days. This lesson explains what a coil is, what each column means, how the three signs are measured, how the filters work, and what the breakouts rail is telling you.

What it is

A coil is a token trading sideways in a tight band. On Range Finder, a token qualifies when the high of its band is at most 1.8 times the low, the band has held for at least a day and a half, and the middle of the band sits between seventy-five thousand and one million dollars of market cap. PumpPill checks the list every thirty minutes.

The board shows the tokens that have held their range longest. A note above the table gives two counts: how many tokens are in a range right now, and how many of those the board is showing. It reads "N tokens are in a range right now. These M have held theirs longest." Each row carries PumpPill's risk read and a Buy button, because a quiet range is not the same thing as a safe token. The video: "Quiet does not mean safe. So each row also carries our risk read."

How to use it

  1. Open /range-finder. The table loads with every chain and every market cap shown.
  2. Pick a chain with the All, Solana and Robinhood tabs.
  3. Pick a market-cap band: Any, Under $250K, $250K to $1M, or Over $1M. The band follows the live market cap, so a row can move bands as prices tick.
  4. Pick a minimum time in range: Any, 3 days+, or 7 days+.
  5. Click any column heading to sort by it. Sorting by "In range" puts the longest coils first; sorting by "Where it sits" puts the tokens pressing their top at one end.
  6. Hover a word in the Signs column. Each sign has a hover note that spells out its rule.
  7. Click a row. The read slides in from the side with "Am I early?", "What's my risk?" and the reasons. Press Escape or click away to close it.
  8. Read the "Broke out recently" rail on the right. Each entry links to the token's read on /scan.

How to read what it shows

Token. The symbol, its chain, and the name.

Now. The market cap right now, from the live price when one has landed. The indicator beside the table reads "live, 4s ago" or "stored data".

In range. How many days the market cap has held inside this band, to one decimal. This is the true count: the detector walks back through its own checks to the last one that sat outside the band, so a brief dip does not reset the number.

Where it sits in its range. A bar from the range low to the range high, with a marker where the market cap sits now. A marker past the right edge turns yellow: the token is above its range top.

Last checks. A small line of the recent thirty-minute checks: the shape of the last day or so.

Signs. Patterns inside the range. There are three, and a row with none of them reads "flat".

  • Higher lows. The lowest market cap in the recent half of the range is above the lowest in the earlier half, by at least two percent. Buyers are stepping in sooner.
  • Volume drying. Trading volume over the recent half of the range is at least ten percent below the earlier half, measured on the median. Sellers are running out.
  • Warming. Two or more of four checks are true right now: volume at 1.3 times the range's usual volume, at least ten percent more buyers than sellers, liquidity up two percent since the range began, and the market cap in the top third of the range. The hover note lists all four with a tick or a cross.

Volume drying and warming can show on the same row. Volume drying is measured over days; warming is a reading from right now. A token can have faded for a week and be waking up this half hour. The hover note says so when both are present.

Volume 24h. Dollar volume over the last day.

Our read. The one-word risk read: Low, Medium or High. "Unclear" means the stored read has no one-word risk; "n/a" means there is no read. Click the row for the reasons.

Buy. Opens @PumpPill_Trade_Bot in Telegram with the contract loaded.

The breakouts rail. A break is the market cap moving more than ten percent above the top of its range. Volume is recorded on the break but is not required for it. Each entry follows one template: "Left [range low] to [range high] at [market cap on the break] on [multiple]x its usual volume. [multiple]x at its peak since." A token too young to have a peak reads "too new to score", and one that went nowhere reads "flat since". Every break is logged, winners and losers alike. The same log of breakouts is what the Every call table on /tables shows for Robinhood Chain.

What it does not tell you

Range Finder does not say that a coil will break, or which way.

A break is a fact about the market cap crossing a line. It is not a signal that the move will hold. Read the "at its peak since" figures on the rail with the flat ones beside them.

The signs are pattern descriptions, not forecasts. Higher lows means buyers stepped in sooner over the recent half of the window; it does not mean they will keep doing so.

The risk read on the row is a stored read. Open it and check the time stamp before you treat it as current.

Range Finder covers Solana and Robinhood Chain and a market-cap band from seventy-five thousand to one million dollars at admission. A token outside that band when first seen is not on the list.

Try it

Open /range-finder, set In range to 7 days+, and sort by "Where it sits in its range". Hover the Signs on the top three rows, then click one to read its risk before you look at anything else.

What the video says the full transcript, for reading or searching
How do you find a coin before it is trending, while it is still quiet? Range Finder is a screener. It lists coins whose market cap has held between the same low and high for days, on Solana and Robinhood Chain, and logs the ones that break out. A coin qualifies when the top of its band is at most one point eight times the bottom, held for at least a day and a half, with its middle between seventy-five thousand and one million dollars. PumpPill checks the list every thirty minutes. Step one. Open pumppill dot org slash range dash finder. The table loads with every chain and market cap. The note above it says how many coins are in a range right now; the ones shown have held theirs longest. Step two. Pick a chain: All, Solana, or Robinhood. Step three. Pick a market cap band: any, under two hundred and fifty thousand, that to one million, or over one million. The band follows the live price, so a row can move bands as prices tick. Step four. Pick a minimum time in range: any, three days or more, or seven days or more. Now read the row. Now is the market cap right now. In range is how many days it has held inside its band; a brief dip does not reset it. Where it sits is a bar from the range low to the high, with a marker at today's market cap; past the right edge it turns yellow, the coin is above its top. Last checks is a line of the recent thirty-minute checks. Step five. Click any heading to sort. In range puts the longest ranges first. Where it sits puts the coins pressing their top at one end. Step six. Hover a word in the Signs column. There are three. Higher lows: the low of the recent half of the range is above the low of the earlier half; buyers are stepping in sooner. Volume drying: trading over the recent half is at least ten percent below the earlier half; sellers are running out. Warming: two or more of four checks are true right now; the hover note lists them with a tick or a cross. None of them reads flat. Step seven. Click a row. The read slides in: Am I early? What's my risk? Then the reasons. Our read says Low, Medium or High; Unclear means the stored read has no one-word risk, N A means no read. A quiet range is not a safe coin, so read it before anything else. Step eight. Read the rail on the right, Broke out recently. A break is the market cap moving more than ten percent above the top of its range. Each entry says what range it left, at what market cap, and how far it went at its peak since; one that went nowhere reads flat since. Every break is logged, and the same log is the Every call table on the Tables page. Buy on the row opens our Telegram trade bot with the contract loaded. What it does not tell you. Range Finder does not say a range will break, or which way. A break is a line being crossed, not a promise the move will hold. The signs describe a pattern; they do not forecast. And the risk read on the row is stored, so check its time stamp. Here is what to do. Open Range Finder, set In range to seven days or more, sort by Where it sits, hover the Signs on the top three rows, then click one and read its risk first.
Try it on a live token

The lesson is the method. The product is where you apply it.

Open Range Finder
Trade it from Telegram

Paste any Solana or Robinhood Chain contract into the PumpPill trade bot: you get the risk read first, then buy or sell in one tap, with limit orders and auto-sells.

Get the weekly Robinhood Chain email

Once a week, on Monday: what happened on Robinhood Chain and how our daily picks did, wins and losses. The daily report stays on the site.

One email a day. Unsubscribe in one click, any time.